How To Fix Windows Error Code – System & DLL Codes (2024)

Today you will learn how to fix Windows error code and system error codes. We have provided the updated fix for 2023 windows system errors.

Most of us might have experienced system crash message, application or file has to close, application not responding message, Windows Update failed message with Windows Error Code, Windows upgrade failed message with Error Codes.

Those are very frustrating and would like to know what happened to your computer and what the error codes are and how to fix them. This article helps you to provide common windows error codes and how to fix common windows error codes.

Fix Windows Error Codes for All Windows Versions. We have provided below some common Windows Error Codes and fix for Windows Error code which we face using Microsoft Windows OS and Microsoft basic Applications.

How to Fix Windows Error Code?

Error 0
Error Message: Connection Successful!
Solution: Does not require any action.

__________________________________________________________________
Error 2
Error Message: System cannot find specified file.
Solution: You should reinstall NCP & DUN.

__________________________________________________________________
Error 5
Error Message: Access Denied
Solution:

Ensure that you’ve entered the appropriate username and password in the field labeled “domain” for NT/2k

Check that the option “accept any authentication including clear text” is activated

__________________________________________________________________
Error 5

Error Message: Invalid Procedure Call
Solution: Dial up and Network components must be installed again

__________________________________________________________________

Error 6

Error Message: Stack Overflow
Solution:

Try cold booting your computer

If this does not work, the problem might come from your RAM or the Swap file

__________________________________________________________________
Error 20

Error Message: The system cannot find the specified device
Solution:
1. Ensure that the right modem has been selected
2. If it does not respond, try to reinstall it
3. You can also try to reinstall NCP/DUN/RAS

__________________________________________________________________
Error 71

Error Message: No more connections are allowed
Solution:
1. Someone else might have connected under your account
2. If you have been ghosted on the server, your Internet Service Provider can bump the ghost program off

__________________________________________________________________

Error 380

Error Message: Invalid Proper Value
Solution:
1. Auto dial should be pointed to the correct dial
2. Else, set up the dial again

__________________________________________________________________
Error 600

Error Message: An operation is pending
Solution:
1. You should first try rebooting your computer
2. Ensure that no other program is using your modem
3. Else, press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem
4. Make sure that your computer is Spyware free

__________________________________________________________________

Error 601

Error Message: The port handle is invalid
Solution:
1. Select the modem’s COM port and under the Diagnosis section, open “More Info”. You should reboot your computer if you are able to get ATI responses, remove the erroneous init string or enter ATZ as the init
2. You can also reinstall your modem
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem
4. Your Dialup Networking should be reinstalled together with its components
5. Your modem might not be working properly. You should then consult your computer manufacturer

__________________________________________________________________
Error 602
Error Message: The port is already open

Solution:
1. Try to reboot your computer
2. Ensure that no other program is using the modem
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem
4. Try uninstalling the AOL Adapters in the Network Control panel and reboot your computer. Install your Dialup Adapter again
5. Remove the erroneous init string or enter ATZ as the init
6. If you have Quicken 2000, deactivate the Quicken Download Manager
7. Try installing your modem again
8. Make sure that your computer is Spyware free

__________________________________________________________________
Error 603

Error Message: Caller’s buffer is too small

Solution:
1. Ensure that your port is not configured to a low speed
2. In your “Port Settings”, ensure that FIFO is not set to low
3. Try reinstalling your Dialup Networking together with its components
4. If you are still having problems, contact your computer manufacturer

__________________________________________________________________

Error 604

Error Message: Wrong information specified.

Solution:
1. Ensure that the are no outages in your area
2. Try to enter the username and password again
3. Set up the dialer again
4. Your Dialup Networking should be installed again together with its components
5. You can also try to reinstall your modem

__________________________________________________________________

Error 605

Error Message: Cannot set port information.

Solution:
1. Ensure that the are no outages in your area
2. Try to enter the username and password again
3. Set up the dialler again
4. Your Dialup Networking should be installed again together with its components
5. You can also try to reinstall your modem

__________________________________________________________________
Error 606

Error Message: The port is not connected.
Solution:
1. Select the modem’s COM port and under the Diagnosis section, open “More Info”. You should reboot your computer if you are able to get ATI responses, remove the erroneous init string or enter ATZ as the init
2. You can also reinstall your modem
3. Else, press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem
4. Your modem might not be working properly. You should then consult your computer manufacturer if the problem persists.

__________________________________________________________________

Error 607

Error Message: The event is invalid.

Solution:
1. If this problem arises while dialing up to the internet, verify that the settings of the event log have been correctly set
2. Try rebooting your system and ensure that the dialer/network settings have been correctly configured
3. Else, install RAS/DUN again

__________________________________________________________________

Error 608

Error Message: The device does not exist.

Solution:
1. Check that the right modem is set in the dialer
2. Ensure that you are using the right modem drivers by checking the modem diagnostics. If it’s not the case, set up the correct drivers.
3. Reinstall the dialer
4. Your modem might not be working properly. Try reinstalling it
5. You should consult your computer manufacturer if the problem persists

__________________________________________________________________

Error 609 – How to Fix Windows Error Code

Error Message: The device type does not exist.

Solution:
1. Check that the right modem is selected in the dialer
2. Ensure that you are using the right modem drivers by checking the modem diagnostics. If it’s not the case, set up the correct drivers
3. Your modem might not be working properly. Try reinstalling it
4. You should consult your computer manufacturer if the problem persists

__________________________________________________________________

Error 610

Error Message: The buffer is invalid.

Solution:
1. Ensure that your port speed is set to low in the modem properties
2. In your “Port Settings”, check that FIFO is not set to low
3. Reinstall the dialer again
4. Else, reinstall RAS/DUN
5. You should consult your computer manufacturer if the problem persists

__________________________________________________________________
Windows Error 611

Error Message: The route is not available.

Solution:
1. Try to reboot your computer
2. Ensure that you set the right configurations for the dialer and network settings
3. Else, install the network components again
4. If you are using a LAN connection, consult your system administrator.

__________________________________________________________________
Error 612

Error Message: The route is not allocated.

Solution:
1. Reboot your computer
2. Ensure that you set the right configurations for the dialler and network settings

__________________________________________________________________
Error 613

Error Message: Invalid compression specified.

Solution:
1. Try to reboot your computer
2. Else, add &K3 to the extra settings.
3. If this still does not solve the problem, add &K3
4. You can also try to reinstall the modem

__________________________________________________________________
Error 614

Error Message: Out of buffers.

Solution:
1. Ensure that our port speed is not too low
2. Try to install your modem again

__________________________________________________________________
Error 615

Error Message: The port was not found.

Solution: Try to install your modem drivers

__________________________________________________________________
Error 616

Error Message: An asynchronous request is pending.

Solution:

1. Reboot your computer
   2. Try to install your modem drivers again

__________________________________________________________________
Error 617

Error Message: The port or device is already disconnecting
Solution:
1. Wait until your modem disconnects properly
2. If this operation is taking too long, reboot your computer.

__________________________________________________________________
Error 618

Error Message: The port is not open.

Solution:
1. Reboot your computer
2. Ensure that no other program is making use of the modem.

__________________________________________________________________
Error 619

Error Message: The port is disconnected.

Solution:
1. Reboot your computer
2. Ensure that no other program is making use of the modem.

__________________________________________________________________
Error 621

Error Message: Cannot open the phone book file.

Solution: Install Blue Frog connection software again.

__________________________________________________________________
Error 622

Error Message: Cannot load the phone book file.

Solution: Install Blue Frog connection software again.

__________________________________________________________________

Error 623

Error Message: Cannot find the book entry.
Solution: Install Blue Frog connection software again

__________________________________________________________________

How to Fix Windows Error Cod Error 626

Error Message: Cannot load a string

Solution:
1. Try to reboot your system
2. Install Blue Frog connection software again

__________________________________________________________________

Error 627

Error Message: Cannot find key

Solution: Install Blue Frog connection software again

__________________________________________________________________

Error 628

Error Message: The port was disconnected
Solution:

1. Install Blue Frog connection software again
   2. Try to install your modem drivers again

__________________________________________________________________

Windows Error 629

Error Message: The port was disconnected by the remote machine.
Solution:
1. Install Blue Frog connection software again
2. Try to enter an alternate Access Number
3. Try to install your modem drivers again

__________________________________________________________________
Error 630

Error Message: The port was disconnected due to hardware failure.
Solution:
1. Install Blue Frog connection software again
2. Try to reinstall your modem drivers
3. Try to use an alternate modem
4. Else, replace your current modem with a new one

__________________________________________________________________
Error 631

Error Message: The port was disconnected by the user.
Solution:
1. Ensure that the right Access Number is being dialled
2. Try to reboot your computer

__________________________________________________________________
Error 632

Error Message: The structure size is incorrect.
Solution:
1. Try to reboot your computer
2. Install Blue Frog connection software again

__________________________________________________________________
Error 633

Error Message: The port is already in use or is not configured for Remote Access dialout.
Solution:
1. Try to reboot your computer
2. Else, try to reinstall your modem drivers

__________________________________________________________________

Error 634

Error Message: Cannot register your computer on the remote network.
Solution:
1. Try to check your network settings and modify your computer name
2. Install the network control panel again

__________________________________________________________________
Error 635

Error Message: Unknown Error
Solution:
1. Try to reboot your computer
2. Install Blue Frog connection software again
3. Else try to reinstall your modem drivers

__________________________________________________________________

Error 636

Error Message: The wrong device is attached to the port
Solution: Check in your settings if you have chosen the right modem

__________________________________________________________________
Windows Error 637

Error Message: The string could not be converted
Solution:
1. Try to reboot your computer
2. Install Blue Frog connection software again

__________________________________________________________________
Error 638

Error Message: The request has timed out.
Solution:
1. Try to reboot your computer
2. Install Blue Frog connection software again

__________________________________________________________________
Error 645

Error Message: Internal authentication error.
Solution:
1. Try to reboot your computer
2. Install Blue Frog connection software again
3. Else, try to reinstall your modem drivers

__________________________________________________________________
Error 650

Error Message: The Remote Access server is not responding.
Solution:
1. Check that your connection and network settings have correctly been configured
2. Ensure that the modem has been correctly set up and look for updated drivers
3. Set FIFO buffers to a lower speed and ensure that you have unchecked the option “Only connect at this speed”

__________________________________________________________________
Error 676

Error Message: The line is busy
Solution: Ensure that your Access Number is still active and is correctly dialled

__________________________________________________________________
Error 678

Error Message: There is no answer.
Solution:
1. First of all check that your phone lines are correctly plugged in
2. Ensure that the Access Number is correct
3. Else, try another Access number
4. If you are trying to make use of your connection in a bad weather, this might be the source of the problem. Wait until it calms down and try again
5. Else, install your modem drivers again
6. If the problem persists, you might need to contact your ISP

__________________________________________________________________

Error 680

Error Message: There is no dial tone.
Solution:
1. First of all check that your phone lines are correctly plugged in
2. The cables might be damaged. Replace them and try again
3. Else, install your modem drivers again
4. If the problem persists, you might need to contact your ISP or a technician

__________________________________________________________________
Error 691

Error Message: Access denied because username and/or password is invalid on the domain.
Solution:
1. Ensure that you have entered the proper username and password
2. Make sure that your account is active and turned on
3. You might also try to enter another Access Number
4. If the problem persists, you might need to contact your ISP

__________________________________________________________________

Error 692

Error Message: Hardware failure in port or attached device.
Solution:
1. Browse for and remove any Blue Frog init strings
2. Install Blue Frog connection software again
3. Else, install your modem drivers again

__________________________________________________________________

Error 718

Error Message: PPP Timeout
Solution:
1. Try to reboot your computer
2. Ensure that you have entered the proper username and password
3. You might try another Access Number
4. Install Blue Frog connection software again
5. Else, install your modem drivers again

__________________________________________________________________

Error 721

Error Message: Remote PPP peer is not responding.
Solution: For Windows 2000/XP/Vista operating systems, ensure that the security setting for the dialler reads “Allow unsecured Password”

__________________________________________________________________
Windows Error 734

Error Message: The PPP link control protocol terminated.
Solution: For Windows 2000/XP/Vista operating systems, ensure that the security setting for the dialer reads “Allow unsecured Password”

__________________________________________________________________

Error 777

Error Message: The connection attempt failed because the modem on the remote computer is out of order.
Solution:
1. Install Blue Frog connection software again
2. Install your modem drivers again
3. Else, install a new modem

__________________________________________________________________

Error 778

Error Message: It was not possible to verify the identity of the server.
Solution:
1. Ensure that you are dialing the correct phone number
2. Verify the connection and Network settings
3. Ensure that you do not have an outage on the phone line
4. Ensure that you have correctly installed your modem and check for updated drivers
5. Set FIFO buffers to a lower speed and ensure that you have unchecked the option “Only connect at this speed”

__________________________________________________________________

Error 779

Error Message: To dial out using this connection, you must use a smart card.
Solution:
1. Ensure that all authorization is allowed in your connection settings in the Security section
2. Verify that you have correctly set the other dialer settings
3. Else, create the dialer again
4. You might need to use the Smart Card Reader as initially setup by the Network Administrator

__________________________________________________________________
Error 780

Error Message: An attempted function is not valid for this connection.
Solution: Ensure that the dialer, not the one set up for LAN use though, has been properly installed and has the right settings

__________________________________________________________________
Error 781

Error Message: The encryption attempt failed because no valid certificate was found.
Solution: You have to get a valid certificate by registering to the website http://windows.microsoft.com/…

Note: The solution for the following problems is already provided in the error messages. If you are still facing problems with them, either contact your ISP or a technician to fix the problem.

__________________________________________________________________
Error 782

Error Message: Network Address Translation (NAT) is currently installed as a routing protocol, and must be removed before enabling Internet Connection Sharing

__________________________________________________________________

Windows Error 783

Error Message: Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not presents, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.

__________________________________________________________________
Error 784

Error Message: You cannot dial using this connection at logon time, because it is configured to use a user name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the user name on the smart card.

__________________________________________________________________
Error 785

Error Message: You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card.

__________________________________________________________________
Windows Error Code – Error 786

Error Message: The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.

__________________________________________________________________
Error 787

Error Message: The L2TP connection attempt failed because the security layer could not authenticate the remote computer.

__________________________________________________________________

Windows Error 788

Error Message: The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.

__________________________________________________________________
Error 789

Windows Error Message: The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.

__________________________________________________________________

Error 790

Error Message: The L2TP connection attempt failed because certificate validation on the remote computer failed.

__________________________________________________________________
Windows Error Code 791

Error Message: The L2TP connection attempt failed because security policy for the connection was not found.

__________________________________________________________________
Error 792

Windows Error Message: The L2TP connection attempt failed because security negotiation timed out.

__________________________________________________________________
Error 793

Error Message: The L2TP connection attempt failed because an error occurred while negotiating security.

__________________________________________________________________
Windows Error 794

Error Message: The Framed Protocol RADIUS attribute for this user is not PPP.

__________________________________________________________________
Error 795

Error Message: The Tunnel Type RADIUS attribute for this user is not correct.

__________________________________________________________________
Windows Error 796

Error Message: The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.

__________________________________________________________________

Error 797

Windows Error Message: A connection to the remote computer could not be established because the modem was not found or was busy.

__________________________________________________________________
Error 798

Error Message: A certificate could not be found that can be used with this Extensible Authentication Protocol.

__________________________________________________________________
Windows Error 799

Error Message: Internet Connection Sharing (ICS) cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1

__________________________________________________________________
Error 800

Windows Error Message: Unable to establish the VPN connection. The VPN server may be un-reachable, or security parameters may not be configured properly for this connection.
Solution:
1. Check your ADSL line as it is probably not synchronized
2. Verify that your Security Options are correctly set in your connection options
3. Either your Network Card or your modem might not work properly. Contact a technician if the problem persists

__________________________________________________________________
Error 995

Error Message: Operation aborted.

__________________________________________________________________
Windows Error 1382

Error Message: Maximum length exceeded.

__________________________________________________________________
Error 1793

Windows Error Message: Account expired.

__________________________________________________________________
Error 2250

Error Message: Network connection does not exist.

Thanks to Microsoft & CCM.

Cannot Save files in OneDrive Documents Folder in Windows 10

It’s true that Windows 10 is a successful operating system when you compare with the earlier windows versions.

I hope you might be aware that the earlier Windows versions (ie., Windows 7, Windows 8, 8.1) are still eligible for Free Windows 10 upgrade.

Although, the Windows 10 upgrade doesn’t go without any issues. The major issue that you Cannot save files in OneDrive Documents folder in Windows 10 after upgrading to Windows 10.

This tutorial helps you to fix if you cannot open or save any files in Documents folder or OneDrive after upgrading to Windows 10.

We know that Microsoft always updating and fixing the operating system issues.

One of the commonly reported issue in Windows 10 is ‘Read Only’ mode or cannot open or save error, “Can’t open or save files” while trying to save files in your computer.

You might have seen other related errors in Windows 10 which include,- ” You don’t have permission to save in this location.

Contact the administrator to obtain permission regardless of the fact that the user is an Administrator or not.”

Before you start troubleshoot / read this tutorial, ensure that your Windows 10 computer has latest windows patches updated successfully.

How to Fix Cannot Save files in OneDrive Documents Folder in Windows 10 after upgrade ?

Generally, OneDrive and Documents are the folders which will have the issue – Cannot save or Open file in Windows 10 after upgrade.

1) Open Search box / Run box now, type %userprofile% into the Run box and hit Enter.

Open the OneDrive folder now. If you are prompted to allow access to OneDrive folder, then click Yes to allow access.

Now you should not have any problems saving files in OneDrive folder.

If it’s doesn’t work, then follow as below:

2) Now Right click on Windows 10 Start button and select Command Prompt (Open as Administrator rights).

Type the following command and press Enter:

cd %userprofile%

Now type the following command syntax and press Enter:

cd OneDrive

Next just type the following command shown as below and then hit Enter:

icacls %userprofile%\OneDrive /inheritance:e

If your case is Documents folder, then just type Documents instead of OneDrive.

If this has worked for you, great, else proceed to the other solution.

3) Verify the permissions and system owner settings are correct.

To check or modify the permissions, by doing right-click on the problematic folder >> Properties and click on Security Tab.

Then Click on Edit, and change the permissions wherever it is required.

Apply the changes and Save to take effect of latest changes.

I hope this tutorial will help you to Fix Cannot Save files in OneDrive Documents Folder in Windows 10.

Please share your ideas here and share this tutorial below Facebook and Twitter.

FIX – Windows 10 We couldn’t complete the updates, Undoing changes

If you’re getting an error ” We couldn’t complete the updates, Undoing changes, Don’t turn off your computer ” during Windows 10 updates / Windows 7 or Windows 8 update.

This will cause your Windows 10 Computer stuck in a loop. Don’t worry, this tutorial helps you to get rid of Windows 10, We couldn’t complete the updates, Undoing changes issue.

Mostly, this issue is occurring when the Windows update download and install automatically released by Microsoft Corporation.

We would see this error ” Windows 10 We couldn’t complete the updates, Undoing changes ” happens after Windows updates and the first restart of your Windows 10 Computer.

Error FIX Windows 10 We couldn’t complete the updates, Undoing changes

Dual Boot Operating System – Windows 10 We couldn’t complete the updates, Undoing changes

Generally, this issue ” We couldn’t complete the updates, Undoing changes ” happens in Windows Dual-Boot environment or we would say, if your computer has 2 or more operating system in it.

If your Windows computer is getting an endless restart / reboot loop, then you should try to get your computer to boot in Safe Mode. Yes. Safe Mode / accessing Advanced Boot Options helps you to repair your Windows computer.

You can easily go to the Command Prompt of your windows system and start System Restore / Automatic Repair to get your Windows 10 computer back.

If your Computers has Dual-Boot environment, then we can easily get rid of “We couldn’t complete the updates, Undoing changes” issue.

From the Dual boot OS selection screen, you will see an option called ” Change defaults or choose other options “.

Click on it and Go to TroubleShoot >> Advanced Options >> StartUp Settings.

Now Press 4 on the Keyboard to Enable “Safe Mode” .

Your PC will restart now and will boot into Safe-Mode to start Repair of Windows 10 Computer.

Single Operating System – Windows 10 We couldn’t complete the updates, Undoing changes

If your computer has a single operating system, then you have to find how to boot Windows 10 in safe mode.

• • Press Shift and click Restart to boot into Advanced startup options screen of your computer.
• • Now Open Settings >> Update & Security >> Recovery >> Advanced startup >> Restart now.
• • Type shutdown /r /o in CMD prompt to reboot your computer into Advanced Boot options or Recovery console.
• • If you had already activated F8 key, then the process is very easy as you can press F8 while booting, to enter Safe Mode without any issue.
• • You may need to boot into Windows 10 through your Windows 10 Installation Media or Recovery Drive. Now Select Repair your computer option and the Advanced startup options will appear on the screen.

Alright, once you have got rid of the reboot loop issue and safely entered into Safe Mode of your desktop, now you have 3 options:

1] Run Command Prompt as administrator. Now, in the CMD box that appears on the computer screen, enter the following syntax, one at a time, and press Enter.

net stop wuauserv
net stop bits

Browse to the C:\Windows\SoftwareDistribution folder and delete all files and folders inside and make the folder empty.

Now you can Restart your computer. It will be able to boot to the Desktop now. You can start again the Windows update now.

Windows 10 We couldn’t complete the updates, Undoing changes

2] Open Your Control Panel >> Programs and Features >> View installed updates. Now you can uninstall the updates which you’ve installed recently (which means just before your problem started).

3] Use System Restore Option to Restore your computer back to Normal (at a prior good point – working state).

Let me know you result and share this tutorial ” Windows 10 We couldn’t complete the updates, Undoing changes ” below Facebook and Twitter.

How to Solve Setup Couldn’t Start Properly Error in Windows 10

Most of the Windows users have experienced ” Setup Couldn’t Start Properly ” Error in Windows 10.

This error ” Setup Couldn’t Start Properly ” may occurs that when you’re using Windows Media Creation Tool / Windows 10 ISO file during Windows 10 upgrade.

This tutorial shows you the simple way to fix ” Setup Couldn’t Start Properly. Please reboot your PC and try running Windows 10 Setup again ” error.

You may think rebooting your Computer may fix this issue “Setup Couldn’t Start Properly“.

It’s not, if you are the one among the users who are facing this issue, then this guide is for you. Let’s see how to Solve Setup Couldn’t Start Properly Error in Windows 10 ?

Why ” Setup Couldn’t Start Properly ” Error occurs in Windows 10 ?

This issue occurs when you’ve corrupted files (Windows upgrade files) in Windows 10 installation or download.

For an instance, if the Media Creation Tool had been force-closed due to Power down / failure during the Process of Windows 10 installation.

This is the main cause to occur the issue ” Setup Couldn’t Start Properly ” when you try to run.

Below are the simple steps to Fix Setup Couldn’t Start Properly Error in Windows 10.

How to Solve Setup Couldn’t Start Properly Error in Windows 10 ?

Step : 1 – Delete Media Creation Tool. This tool is very small in file size that 18 MB. If you don’t want to download Media Creation Tool again, then you can just take a backup of Media Creation Tool before you delete it.

Step : 2 – Reboot Your Computer.

Step : 3 – Now Open C: \ drive and ensure that you’re able to view all hidden files and folders.

If you’re not able to view hidden files and folders in Windows 7, 8 and Windows 8.1, then you need to enable hidden files and folder in Windows 7,8, and 8.1.

The simple way to enable hidden files and folders is Go to Start button >> Control Panel >> Appearance and Personalization >> Folder Options.

Now just Click on the View tab and under Advanced settings click Show hidden files and folders. That’s all.

Step : 4 – Now delete the folders called ; $Windows.~BT and $Windows.~WS.

Step : 5 – Now start download the Media Creation Tool again (Or you can use the backed up file) and run it.

It will start run normally as it designed and will prompt your few questions as it asked earler and then it will start downloading the Windows 10 Files from the Scratch without any issues.

This is the simple way to fix ” Setup Couldn’t Start Properly. Please reboot your PC and try running Windows 10 Setup again ” error.

How to fix Outlook Send / Receive error 0x800CCC13 in Windows 10

Whoever upgraded their operating system to Windows 10 might have experienced this issue.

Yes, when you try to send an email, it will fail in Microsoft email client outlook application. MS email clinent will throw an error as given below.

This tutorial shows you How to fix Outlook Send/Receive error 0x800CCC13 after Windows 10 upgrade.

Error : Outlook Send/Receive error 0x800CCC13 after Upgrading to Windows 10 is:

User account – Sending’ reported error (0x800CCC13): ‘Cannot connect to the network. Verify your network connection or modem.

How to fix Outlook Send/Receive error 0x800CCC13 after Windows 10 upgrade ? 

The Quick Fix for this issue is, you can use System File Checker to repair MS Email client’s corrupted files.

• • Close MS Outlook.
• • Right Click on the Start button and select :Command Prompt (Admin) If you are not able to see this, instead of that use : Windows Powershell (Admin)
• • Now type in the Command Prompt as : sfc /scannow (Space between sfc and the slash) OR copy paste this command from my webpage.

Outlook Send&Receive error 0x800CCC13

• • Just wait to complete the process. Generally, it will take below 20 Minutes with a normal Hard Disk Drive. If your HDD is SSD, then the process time will be very less.
• • Now Restart your Windows 10 computer and open MS Outlook. It will work as you expected.

If this is not working, you may try below methods:

1] Create a new shortcut to Microsoft Outlook 2013 on your desktop. Now Right click on the recently created icon and click on Run As Administrator option.

Now verify that if you are above Send or Receive emails without any issue. If so, you can create an elevated shortcut to always run it in that mode to get rid of 0x800CCC13 issue.

2] You can Boot your computer in Clean Boot State and check that if you are above to Send/Receive.

If it is okay, then you may need to find the offending app / program that is interfering with Microsoft Outlook, and disable that program.

3] Try Creating new user profile and try to reproduce this issue – 0x800CCC13

4] Open Search / Run box, and then type ” Outlook /safe ” and hit Enter to open Outlook in safe Mode and check the status.

If this solves the issue 0x800CCC13, then its confired that there could be something problematic with Add-ins.

To verify this, click File Menu >> Options >> Add-ins >> Go Button besides Manage: Com-in Add.

You can try to identify the offending add-on and just disable it.
Now Restart MS Outlook and verify the issue.

Above are the simple ways to get rid of Outlook Send/Receive error 0x800CCC13.

How to Fix Something Happened Error Message in Windows 10 Upgrade

You might have encountered “Something Happened” error during Windows 10 Upgrade.

This article shows How to Fix Something Happened Error Message in Windows 10 Upgrade.

Users are getting an error during upgrade Windows 7 or 8.1 to Windows 10 using Windows 10 Media Creation Tool.

“Something Happened” Error Message in Windows 10 Upgrade occurs due to the below explained factors.

You just follow below shown Simple steps to fix Unable to Upgrade to Windows 10 – Something Happened error.

How to Fix Something Happened Error Message in Windows 10 Upgrade

Method 1: Run Media Creation Tool as Administrator

Right Click the .EXE file Media Creation Tool and select “Run as Administrator” option and finish the upgrade.

Method 2 : Verify and Change Locale and Language Settings to English (United Sates)

Below is the simple steps to change locale and language settings in your computer to fix the Something Happened Error Message in Windows 10 Upgrade problem.

• • Open Control Panel > click on Region icon. ( Alternatively you can direct open it using intl.cpl command in RUN or Start Search box.)
• • You will see a new window of your current system locale, language, etc.
• • Go to “Administrative” tab and click > “Change system locale” button.
• • Now select English (United States) option from the drop-down box and click OK button.

Method 3: Disable Antivirus Program or Internet Security Suite

Try Disable Antivirus Program or Internet Security Suite to fix Something Happened Error Message in Windows 10 Upgrade.

If the issue still occurs then Remove / uninstall Antivirus Programs from “Control Panel -> Programs and Features” window.

Method 4: Verify the Services

Check the below services are running properly and all set run as Automatic to fix Something Happened Error Message in Windows 10 Upgrade.

• • Go to Start > Run > Type services.msc. It opens Services Manager.
• • Ensure following services are set to Automatic and running without any issue.

Automatic Updates OR Windows Update

Background Intelligent Transfer Service

IKE and AuthIP IPsec Keying Modules

Server

TCP/IP NetBIOS Helper

Workstation

If you find any / all of the above mentioned services are not running or not set to Automatic, double-click on the service, set its Startup type to Automatic from the drop-down list, Apply the changes and click on “Start” button to immediately start the service to complete.

Now Restart Windows / Computer and it should fix Fix Something Happened Error Message in Windows 10 Upgrade issue.

Fix Windows 10 Slow Boot Why Windows 10 takes more time to Boot

You might have experienced that Windows 10 takes more time to boot- Windows 10 Slow Boot.

If this is your case, then You have reached the right place to rectify it.

You have to fine tune your Windows 10 Advanced Boot options to get rid of Windows 10 Booting slowness issue.

How to Fix Windows 10 Slow Boot?

This article shows you how to speed up Windows 10 Boot process.

How to Speed up Windows 10 Boot process ? Windows 10 Slow Boot

Click Windows Key and type ” msconfig” in Search field > System Configuration.

Now go to the Boot tab and just click on the Advanced options button.

Tick / Enable the number of processors and Maximum memory check-boxes.

Set those maximum values based on current hardware configuration of your computer.

Click OK to save new settings and restart your computer to take effect of new changes.

6 Ways to Fix Windows 10 Slow Boot Issue.

1. Disable Fast Boot

2. Virtual Memory Adjustments

3. Disable Linux Terminal

4. Update Graphic Drivers

5. Remove Unwanted Programs

6. Restart

I hope this simple way helps to speed up your Windows 10 Computer.

How to delete Windows Update Cache Files

Microsoft Corporation helps its users to update all applications with the help of Internet. Yes.

Microsoft Windows Update works with the programs and keep the Computer running without any issues.

Whenever Windows Updates happens, this Windows Update programs keep the update installation files on your computer’s hard drive which eats more space on your drive. This tutorial shows how to delete Windows Update Cache Files easily.

The Windows Update Cache Fies will be downloaded and placed in C:\Windows\SoftwareDistribution\Download. Day by Day the size of this folder C:\Windows\SoftwareDistribution\Download will be increased and this will occupy a huge space in the hard drive. We will analyze how to get rid of Windows Update Cache Files.

The Primary reasons to Clean up Windows Update Cache Files are;

• • You’re running Out of Disk Space on your Computer.
• • Windows Updates Failing.

Cleaning up the Windows Update Cache will resolve above 2 issues.

How to delete Windows Update Cache Files ?

• • Turn OFF Windows update service
• • Go to Command Prompt and type net stop wuauserv and press enter.
• • Now Open File Explorer (My Computer) Go to View >> Folder Options >>
• • Enable the “Display of hidden Files and Folders“.
• • Now Navigate to the path C:\Windows\SoftwareDistribution\Download. Now you’re good to delete the contents of the Download folder.
• • Again open the command prompt and type net start wuauserv , it will restart the Windows Update service.

If you want to delete Using a batch file Windows Update Cache Files using batch file the please follow below steps.

• Create a batch file and name it. For an instance (Purge) and use it as a shortcut to clear the content (purge) of the Windows Update cache when it is needed.

• Now Open Notepad app and paste below commands;

CD\
CD %Windir%
CD SoftwareDistribution
DEL /F /S /Q Download

• Save As this file and locate this file (Purge.bat) anywhere in your computer.

• Now double click the .bat file purge.bat, it will start and cleanup the C:\Windows\SoftwareDistribution\Download folder as per the script.

• Ensure that the Windows Update Service has been stopped during this folder cleanup.

This tutorial will help you when you want to cleanup spaces in your hard drive, or if you have any problem during Windows Update.

How to fix Xinput1_3.dll Missing Error Windows

This tutorial shows you that how to fix Xinput1_3.dll missing error in Windows.

You may just follow up the simple procedure to get rid of the error: ” The program can’t start because XINPUT1_3.dll is missing from your computer. Try reinstalling the program to fix the problem “.

You might be aware of DirectX which you need when you play games on you computer.

Yes, DirectX is an add-on app which makes you enjoy while play games on your PC.

It will give you high performance games and will maintain you computer as much as good performance.

Xinput1_3.dll Not Found or Missing Errors can be listed as :

The file xinput1_3.dll is missing.
Xinput1_3.DLL Not Found.
File xinput1_3.dll not found.
Xinput1_3.dll not found. Reinstalling might help fix this.

Most probably, you will be receiving this error when you play games on your PC. Yes, when you try to open any games or software it will give you an error as “The program can’t start because Xinput1_3.dll is missing from your computer”.

Xinput1_3.dll is the part of the Microsoft DirectX run-time Components. Also, we can say it is a tool which install the required libraries on you windows computers which helps to run Games, Videos and programs.

If you encounter this issue the best way to get rid of Xinput1_3.dll Missing Error is, reinstall DirectX on your computer.

You should be more alert when you download Xinput1_3.dll as there may be chances for malware or incompatible file of your version.

How to Fix Xinput1_3.dll Missing Error

Step 1 : Go to microsoft.com website and Download DirectX latest version and compatible with your Windows operating system.

Step 2 : Now Close all the opened Program and then install DirectX which you’ve downloaded from Microsfot.com.

Step 3 : Okay, Once DirectX installation is over then you must Restart your PC to take effect of DirectX update.

Step 4 : Now, Let’s open your Game or Program which throwing XINPUT1_3.dll missing error. It will work as you expected.

If you Still encounter the same error then you should reinstall the Game and reinstall the Windows directX and enjoy playing your Game or Software.

Important: Don’t download and Install only xinput1_3.dll in your computer. It will collapse your DirectX Connectivity as Xinput1_3.dll files are different for each and every version of DirectX.

To avoid this kind of situation, I would recommend to download entire DirectX form the Microsoft support Website.

Common Xinput1_3.dll System Error messages are follows as:

The file Xinput1_3.dll is missing .Try reinstalling the Program to fix this Problem.

Xinput1_3.dll file not found. Try reinstalling the Program to fix this Problem.

Xinput1_3.dll is missing from your computer .Try reinstalling the Program to fix this Problem.

The Program Can’t start Because XINPUT1_3.dll is missing from your computer .Try reinstalling the Program to fix this Problem.

This is the simple way to get rid of Xinput1_3.dll Missing Error.

How to Purge Windows Update Cache Files

Increasing the size of Windows Installation files is a big head-ache.

We need to Purge Windows Update Cache Files instantly. As the Windows Update Cache files always keep on increasing whenever a new installation happens.

As the Windows Update Cache files are located in the root folder, hence the Windows update Cache files need to be deleted instantly.

The location of the Windows Update Cache files is C:\Windows\SoftwareDistribution\Download . Let’s see how to delete the Windows Update Cache files easily.

How to Delete the Windows Update Cache Files ?.

If you delete Windows update caches files, you will instantly get back your storage.

Yes, deleting the Windows installation files in C:\Windows\SoftwareDistribution\Download is great idea to free up the root folder and this will make your computer speedy.

You may Purge Windows update cache files thorugh Windows maintenance as a routine task.

Although, we have an option to delete windows installaton files manually.

How to Purge Windows Update Cache Manually ?.

• • Turn off ” Windows Update Service ” which stops background downloads immediately.
• • Open Command Prompt > type ” net stop wuauserv ” Command and enter.
• • Go to File Explorer > Go to View > Folder Options.
• • Select now Show hidden files, folder, and drives radio button. Now click Apply which enables the display of hidden files on your pc.
• • Now open C:\Windows\SoftwareDistribution\Download folder and delete all the content of the Download folder.
• • Open Command Prompt (new one), now run ” net start wuauserv ” command to restart Windows update service.

How to Purge Windows Update Cache file Automatically ?.

Window helps to delete the windows update cache automatically by using a windows batch file. You can run this batch file to clear windows installation files instantly.

How to create a Batch file to Delete Windows installation files?.

Open a Notepad and copy and paste the below code:.

net stop wuauserv
CD %Windir%
CD SoftwareDistribution
DEL /F /S /Q Download
net start wuauserv

Click on File > Save As. Now you can save this batch file. Now you can click on Save as type drop down menu.

Select All Files and then rename the file as you wish. For an instance, you can name as saransaro_erasecache.bat file and Save.

Now select saransaro_erasecache.bat and right click it and click Run As Administrator.

This task will keep this batch file running continuously to delete all files in the Windows update cache folder.

These are the simple way to delete Windows Update Cache files. Hope this article ” How to purge windows update cache files” will definitely help you.

How to Fix Windows dll Error?

Fix all Windows DLL Error – Windows operating system is being used by more than billion users.

Windows dll errors occur when we remove software or applications or the situation of the windows DLL files.

Also we have seen in many cases that windows.dll errors may happen due to registry issue, malware or virus problem.

As windows is user friendly, hence it has been accepted by most of the computer users.

We might have experienced many time with Windows DLL error. Yes, it may happens during new software installation, windows boot time, updating software’s or updating patches and so.

This article helps you to get rid of Windows DLL error.

Simple Steps to fix all Windows DLL Error

You just follow below simple steps to fix for all kind of DLL error in windows.

Make a note of the DLL Error pop-up.

Go to dll-files.com.

Type the DLL Error noted earlier in “write whole or partial file name to search:” box and click on Search button.

It will prompt you to download ZIP File as shown in the figure and extract the zip file now.

Locate the Extracted xxxx.dll file (in my case shell32.dll) to the appropriate path depends on your operating system.

C:\Windows\System32 (Windows XP, Vista, Windows 7, 8, 8.1, Windows 10)
C:\Windows\System (Windows 95/98/Me)
C:\WINNT\System32 (Windows NT/2000)

Once you paste extracted .dll file, then restart your laptop / desktop to take effect of the changes.

Now you will not see any DLL error.

FIX “The VMware Authorization Service in Windows 10 is not running” Error on Windows

VMware Workstation is a capable, steady and most reliable virtual machine creator out there for Windows.

Each Windows client, who needs to make a virtual machine to dispose of strange issues while attempting another programming, VMware starts things out in the rundown to experiment with.

This tutorial shows How to fix “The VMware Authorization Service is not running” Error in Windows.

The VMware Authorization Service is not running

VMware is a steady programming to give vastly improved experience on virtual machine with the goal that clients can dispose of superfluous issues like hanging and slacking.

VMware needs a considerable measure of memory use to run easily.

Memory as well as it requires running different foundation applications to be running persistently with the goal that clients can show signs of improvement experience.

Then again, it sets a few applications to begin at start up or Windows boot.

Despite the fact that, it makes your Windows nearly slower than beginning days, however you might at some point need to do this.

On the off chance that you have erroneously handicapped a few elements and now VMware Workstation is demonstrating a few blunders on your screen before beginning the virtual machine, here is the arrangement.

The most widely recognized issue is The VMware Authorization Service is not running. The blunder resembles the accompanying window.

If you’re encountering this error ” The VMware Authorization Service is not running ” continuously, also you restart your VMware Workstation or reboot your computer many times.

If still the problem appears on your screen, just follow below simple steps to solve solve this error “The VMware Authorization Service is not running” Error on Windows.

How to Fix “The VMware Authorization Service is not running” Error in Windows ?

Open CMD prompt as Admin rights and type services.msc.

It will pop-up an another new window. Now, scroll down and find out the service called “VMware Authorization Service “.

After finding the desired option, double click and open the “VMware Authorization Service” Properties.

The service “VMware Authorization Service” should be as “Stopped” state. Now Click on “Start” button to Start “VMware Authorization Service”.

It will take 2 – 3 seconds to start the VMware Authorization Service. After running the service successfully, click on OK and close all menus.

Now, you’re good to start your virtual machine which is installed through VMware application.

This is the simple way to get rid of “The VMware Authorization Service is not running” on Windows.